| Gift vouchers |
| |
| Ideal for Birthday or Christmas presents why not buy the Triumph enthusiast in your family a voucher redeemable against books or parts. Any amount from £10 upwards, just ask for details. |
|
 - 57-4590A
- Alloy clutch pressure plate
- CNC Alloy clutch pressure plate. Fits all T120/T140. Replacement for the standard pressed steel plate, CNC-machined from high strength alloy, lighter, stronger. Maximum clutch lockup, fast consistent release, doesn't warp. Our own design with steel thread for adjuster pin. Suits any 3-spring clutch
|
|
|
 - 70-6519A
- Alloy contact breaker cover
- Alloy contact breaker cover.Fits all Triples (but not if Lucas RITA ignition is fitted), £15.95 + VAT. Order part number 70-6519A
|
|
|
 - 70-6519B
- Manx contact breaker cover (use 70-7354SS screws)
- Manx contact breaker cover.Fits all Triples (but not if Lucas RITA ignition is fitted), tastefully CNC-machined and engraved with the famous Manx 5 TT winners logo. £19.95 + VAT. Order part number 70-6519B.
|
|
|
 - 70-6580A
- Triple alloy sump plate c/w drainplug and 2 sump gaskets
- Triple alloy sump plate c/w magnetic drainplug. Fits all triples, allows oil to be drained from the sump without removing the sump plate (and exhaust system on T160!) Machined from billet aluminium, with steel magnetic drainplug. Please note this should not be seen as an excuse not to remove and clean the sump filter gauze at the recommended intervals! (includes magnetic drainplug). Order part number 70-6580A in the catalougue under Engine sump plate. £33.95plus vat. incl sump gaskets to go with the plate, part no 71-1444.
|
|
|
 - 70-8737A
- Finned points cover
- Finned points cover. Fits all T120 and T140 without Lucas ignition. Polished casting. Great retro look. £13.95 + VAT. Order part number 70-8737A.
|
|
|
 - 71-3671A
- T140 CNC rocker lid
- Superb replacement T140 rocker lid. Machined from billet aluminium, with Triumph logo profile and engraving. Please note, this does not include the rocker box. £29.95 each plus vat
|
|
|
 - 71-7191A
- T140E alloy pushrod tube
- 71-7191A T140E - CNC-machined alloy
|
|
|
 - 82-5343A
- Magnetic drain plug + seal 70-0402
- Magnetic drain plug + seal 70-0402. Fits all unit Triumph oil tanks, now stainless steel, removes any metal particles in the oil system, particularly useful after an engine rebuild. £4.59 + VAT. Order part number 82-5343A.
|
|
|
 - ACUMAX
- Acumax Platinum Smart Charger
FEATURES
- Microprocessor based - this unit does it all in respect of battery maintenance, charging and recovery. The electronics are housed inside a splash proof extruded aluminum casing of an extremely robust design, and comes supplied with:
- A stylish steel presentation case
- An internal buzzer to advise you of incorrect polarity connection or irrecoverable sulphated battery
- Indicator lights for :
- On/Off.
- Incorrect polarity
- Good battery.
- Battery being charged
- Weak battery
- Recovery mode in progress.
- Wall bracket with fixings.
- Fused and waterproof eyelet lead for permament connection to battery
- Crocodile lead for temporary connections to the battery
- 3M extension lead
- UK and european main leads.
- Reverse polarity protection.
- Over voltage & temperature protection
- Order code ACUMAX £38.28 plus vat
|
|
|
 - HYD-BPT19
- 7 plate clutch conv.
7 plate clutch conv. This conversion consists of 7 new plates with smaller friction area plus one new plain plate. Compared with standard it reduces problems of sticking, slipping, swelling, dragging and heavy operation provided the other components are in good condition. Use with your existing 6 plain plates Please ensure the plain plates are flat and not warped.
Customer comment .Fitted the new 7 plate clutch kit on Tuesday, took the bike out for a run in the sun this morning. Together with the T120 clutch springs, they have transformed the way the bike rides. The clutch is much lighter, gear changes are slick and easy, and I can select neutral while stationary. Great product, many thanks, would highly recommend it to anyone.
|
|
|
 - LEG-0007
- Lifting handle
New re introduced product, the LEG-0007 Lifting handle
Fits at the drive side of the bike and is used to lift the bike up onto the centre stand, Folds away very nicely. Anyone who has lifted these bikes knows how heavy they are, Easy to fit , just remove the rear shockabsorber, fit the handle in behind the top shockabsorber bolt, locate the hole for the peg and refit the shockabsorber and mounting bolt, job done. Very usefull piece of kit. Fits T160, T150 and T120 plus possibly many more models
|
|
|
 - LEG-0016
- Trident anti-drain valve
- The Trident engine already has an anti-drain valve in the crankcase but on some bikes this doesn't seem to work and it can be difficult to rectify. So we developed a purpose made valve which is incorporated into the gauze filter in the oil tank, so it is barely noticeable on the bike. There are 2 sizes, for 5/16" and 3/8" oil pipe, so we need to know which size pipe you have. We also recommend removing the existing valve if this one is fitted. It should keep the oil in the tank for a few weeks, and avoids the problems of having all the oil in the bottom of the engine every time you want to ride the bike. It can also mean the bike is easier to start as you don't have the crank submerged in cold sticky oil. The valve operates on a "fail safe" principle, in the worst case it will just stop being a valve and let the oil through. £21.28 + VAT. Order part number LEG-0016.Please note, this will not fit R3 oil tanks as they are a different design.
|
|
|
 - PSP001
- PSP Hydraulic clutch cyl.
- PSP-001 Converts clutch completely to hydraulic operation, much more positive clutch action and no more cable breakages. Clutch conversion only, £102 + VAT, See PSP-001a for the complete kit
|
|
|
 - PSP001A
- PSP Hydraulic clutch conv. complete
PSP Hydraulic clutch conv, complete with Magura handlebar master cylinder and braided hose, £170.20 + VAT Suitable for T120 -T140. Please remember that if you have the left hand switch gear a part of the existing clutch lever, you will have to re position the switch or fit a seperate handlebar switch assembly part no 60-4586. When ordering, please state type of handlebar, UK type (LOW) or US Type (HIGH)
|
|
|
 - PSP002
- Billet pushrod tubes late T120 (pr)
- PSP002 T120 - CNC-machined alloy For late T120. Priced as a pair
|
|
|
 - PSP003
- Billet pushrod tubes T140/TR7 (pr) (71-3329)
- PSP003 T140V - CNC-machined alloy. Priced as a pair
|
|
|
 - ULT-T120
- Ultimate clutch T120
- Ultimate clutch T120. This represents the pinnacle of development of the Triumph 3-spring clutch. Hard-anodised billet alloy clutch drum, alloy friction plates, top quality plain steel plates, billet pressure plate for positive lock up and instant release, new springs. Available in T120 (Duplex) or T140 (Triplex) condition. Weight saving over standard approx 1.5Kg (3lbs) £152.50. Add £25 to upgrade to 7-plate clutch conversion.
For the upgrade please use order code HYD-BPT19A with the ULT-T120 code
|
|
|
 - ULT-T140
- Ultimate clutch T140
- Ultimate clutch T140. This represents the pinnacle of development of the Triumph 3-spring clutch. Hard-anodised billet alloy clutch drum, alloy friction plates, top quality plain steel plates, billet pressure plate for positive lock up and instant release, new springs. Available in T120 (Duplex) or T140 (Triplex) condition. Weight saving over standard approx 1.5Kg (3lbs) £152.50. Add £30 to upgrade to 7-plate clutch conversion.
For the upgrade please use order code HYD-BPT19A with the ULT-T140 code
|
|
|
|
| |
| |